Gelling behavior of MgAl2O4 slurries with a common dispersant

MgAl₂O₄ transparent ceramics were shaped by a commonly used polyacrylic acid (PAA), which acted as both dispersant and gelling agent. The spinel slurries were prepared by ball-milling MgAl₂O₄ powder, PAA, and water in an attrition mill. The gelling of slurries happened at room temperature in air atmosphere without any other organic additive. The gelling mechanism was the formation of chelates between Mg²⁺ and carboxyl groups (-COO⁻) of PAA. The frequency-based testing method was applied to investigate the gelling process of the as-prepared slurry. In addition, a novel in situ characterization method based on a modified indentation testing was invented to better understand the strengthening of the wet green body with time and to guide when demolding could be carried out. After sintering, transparent MgAl₂O₄ ceramics with high in-line transmittance were resulted.     

Various density light field image coding based on distortion minimization interpolation

In recent years, the light field (LF) as a new imaging modality has attracted wide interest. The large data volume of LF images poses great challenge to LF image coding, and the LF images captured by different devices show significant differences in angular domain. In this paper we propose a view prediction framework to handle LF image coding with various sampling density. All LF images are represented as view arrays. We first partition the views into reference view (RV) set and intermediate view (IV) set. The RVs are rearranged into a pseudo sequence and directly compressed by a video encoder. Other views are then predicted by the RVs. To exploit the four dimensional signal structure, we propose the linear approximation prior (LAP) to reveal the correlation among LF views and efficiently remove the LF data redundancy. Based on the LAP, a distortion minimization interpolation (DMI) method is used to predict IVs. To robustly handle the LF images with different sampling density, we propose an Iteratively Updating depth image based rendering (IU-DIBR) method to extend our DMI. Some auxiliary views are generated to cover the target region and then the DMI calculates reconstruction coefficients for the IVs. Different view partition patterns are also explored. Extensive experiments on different types LF images also valid the efficiency of the proposed method.     

某福利院一起肠炎沙门菌食源性疾病的调查分析

目的 对某福利院一起肠炎沙门菌食源性疾病进行调查和溯源,为研究相关食源性疾病提供参考。方法采用流行病学、食品卫生学和脉冲场凝胶电泳(PFGE)同源性分析等方法,分析本次食源性疾病事件。结果 确认本次事件中病例23名,患病率5.65%(23/407)；现场采集病例肛拭子15份和厨房工作人员肛拭子3份、留样菜品3份、水果2份以及冰棒1份,其中从11份病例肛拭子中检出肠炎沙门菌,PFGE结果显示11株肠炎沙门菌的DNA条带图谱相似性为96.4%,聚类分析为同一型,结合流行病学调查,初步判断菌株来自同一克隆系。结论 综合流行病学、食品卫生学和实验室检测结果,确定为一起肠炎沙门菌引起的食源性疾病,福利院应加强对特殊人群的饮食安全管理,制定相应的食源性疾病突发事件应急处理预案,防止此类事故再发生。     

Flow modeling of high-viscosity fluids in pipeline infrastructure of oil and gas enterprises

Today, the issues related to solving the problem of finding an effective distribution of oil flows through the system of oil pipelines in order to reduce the total energy consumption are relevant. The solution to this problem is connected with selection of rational pumping modes for various technological sections of oil pipelines using modern methods of mathematical programming or new techniques for improving the energy and transport characteristics of oil.Reducing energy consumption during pumping of crude through oil trunk pipelines can be achieved by various methods. Numerous investigations in this direction are mainly carried out to save energy on separate single-line pipelines. However, due to the development of the network of trunk oil pipelines in the world over the past decades, the issues of energy efficient management of oil flows throughout the entire oil pipeline system of oil and gas enterprises become urgent.This paper analyses parameters for pipeline transport of high-viscosity and heavy oils. The article proposes a method for assessing the rheological properties of oil for further planning of pumping taking into account the preservation of oil quality and an increase in energy and transport characteristics. The proposed solutions and tasks for predicting changes in the viscosity-temperature characteristics of the flow for blends of different oil types are especially relevant in the current conditions of an increase in the share of oil production with complex rheological characteristics. Results of the presented investigations may be used for planning the measures of efficient transportation of high-viscosity and heavy oils.     

Layered ceramics based on InGaO3(ZnO)2: Preparation and experimental investigation of high-temperature heat capacity and thermal conductivity

This paper reports on a method for producing ceramics from a high-purity, submicron InGaO₃(ZnO)₂ powder synthesised using a PVA-assisted gel combustion method, as well as an experimental study of the thermophysical properties of the ceramic materials obtained. The platelet-like crystallites of the InGaO₃(ZnO)₂ obtained were several microns long and up to several hundred nanometres thick. Layered ceramics obtained by sintering compacted InGaO₃(ZnO)₂ powders at temperatures of 1373–1773 K had a bulk density that was 68–96 % of the theoretical density. The temperature dependence of heat capacity in the range 306–1346 K was studied experimentally for InGaO₃(ZnO)₂ using the DSC method. It was found that, in the range 323–1173 K, layered InGaO₃(ZnO)₂ ceramics had a low thermal conductivity, which decreased from 2.0–1.3 W/(m K. The results obtained make it possible to consider this material as a promising thermal barrier coating.     

Effect of Li2O on the crystallization behavior of CaO-Al2O3-SiO2-Li2O-Ce2O3 mold slags

The effect of Li₂O on the crystallization properties of CaO-Al₂O₃-SiO₂-Li₂O-Ce₂O₃ slags was investigated. With increasing the Li₂O content, LiAlO₂ and CaCeAlO₄ were the main crystalline phases. LiAlO₂ formed for the charge compensating of Li⁺ ions to [AlO₄^5?]-tetrahedrons, and CaCeAlO₄ formed as a result of the charge balance of Ce³⁺ ions, Ca²⁺ ions, and [AlO₆^9?]-octahedrons. Increasing the content of Li₂O to 10%, the crystallization temperature was the highest, and the incubation time was the shortest. The crystallization ability was strong due to the three factors of strengthening the interaction between ions and ion groups, decreasing the polymerization degree, and increasing the melting temperature. Further increasing the content of Li₂O, the crystallization performance was obviously suppressed, because the melting temperature and the force between the cations and the anion groups decreased.     

Lactones in the Synthesis of Prostaglandins and Prostaglandin Analogs

In the total stereo-controlled synthesis of natural prostaglandins (PGs) and their structural analogs, a vast class of compounds and drugs, known as the lactones, are encountered in a few key steps to build the final molecule, as: δ-lactones, γ-lactones, and 1,9-, 1,11-, and 1,15-macrolactones. After the synthesis of 1,9-PGF_2α and 1,15-PGF_2α lactones, many 1,15-lactones of E₂, E₃, F₂, F₃, A₂, and A₃ were found in the marine mollusc Tethys fimbria and the quest for understanding their biological role stimulated the research on their synthesis. Then 1,9-, 1,11-, and 1,15-PG lactones of the drugs were synthesized as an alternative to the corresponding esters, and the first part of the paper describes the methods used for their synthesis. The efficient Corey procedure for the synthesis of prostaglandins uses the key δ-lactone and γ-lactone intermediates with three or four stereocenters on the cyclopentane fragment to link the PG side chains. The paper describes the most used procedures for the synthesis of the milestone δ-Corey-lactones and γ-Corey-lactones, their improvements, and some new promising methods, such as interesting, new stereo-controlled and catalyzed enantioselective reactions, and methods based on the chemical/enzymatic resolution of the compounds in different steps of the sequences. The many uses of δ-lactones not only for the synthesis of γ-lactones, but also for obtaining 9β-halogen-PGs and halogen-substituted cyclopentane intermediates, as synthons for new 9β-PG analogs and future applications, are also discussed.     

Sol-gel auto-combustion synthesis of Ba–Sr hexaferrite ceramic powders

We report the mechanism involved in sol-gel auto-combustion synthesis of Ba–Sr-hexaferrite (Ba_1-xSr_xFe₁₂O₁₉; x = 0, 0.25, 0.5, 0.75 and 1, BSFO) ceramic powders through the analysis of the phases evolved during annealing of the as-synthesized powders, along with their structure and morphological studies. The XRD patterns of the as-synthesized samples indicate the formation of barium/strontium monoferrite ((Ba/Sr)Fe₂O₄) and maghemite (γ-Fe₂O₃) phases along with a minute amount of hematite (α-Fe₂O₃) phase. Annealing of these samples facilitates formation of BSFO phase through the solid state reaction between BaFe₂O₄ and γ-Fe₂O₃ phase. Interestingly, after annealing the samples with x = 0, 0.5 and 1, at 1000 °C for 2 h, we observed that phase pure Ba–Sr hexaferrite structure forms, but for samples with x = 0.25 and 0.75, high amount of hematite (α-Fe₂O₃) phase is observed, especially for x = 0.75. The reason associated with this could be the large difference between the ionic radii of Ba²⁺ and Sr²⁺ ions occupying the oxygen site. Furthermore, our study on annealing dependent phase evolution confirms that, this difference in ionic radii forbids the formation of a single phase Ba–Sr hexaferrite. The growth of clear hexagonal-shaped plate-like particles with varied particle sizes was observed for all the samples. The particle size variation may be due to the influence of the ionic radii difference on the sinterability of the samples. Our study provides a better understanding of synthesis mechanism of Ba–Sr hexaferrite samples.     

Sintering behavior of Ni–Zn ferrite powders prepared by molten-salt synthesis

Ni_0.5Zn_0.5Fe₂O₄ powders were prepared by a novel molten-salt synthesis method. The effects of calcination processes of the powders on their sintering behaviors were investigated. Compared with the synthesis by traditional solid-state reaction, the proposed molten-salt method can significantly reduce the synthesis temperature of Ni_0.5Zn_0.5Fe₂O₄ from 800 to 550°C below, and the prepared powders have relatively high sintering activity at low temperature, which can thus decrease the sintering temperature. However, the abnormal growth of grains is easy to occur during sintering, thus resulting in uneven grain size. In particular, during the molten-salt synthesis, the holding time for calcination is a dominant factor affecting the activity and crystallization degree of the resultant powders. From the point of view of increasing the density of sintered bodies, the optimal conditions for synthesizing Ni_0.5Zn_0.5Fe₂O₄ powder by the proposed molten-salt synthesis is 400°C for 6 h. In addition, the saturate magnetization of the finally obtained ferrite ceramics has nothing to do with the preparation processes, while their coercivity depends on their densification and grain size caused by their different processing routes.     

Crystallization behavior and density functional theory study of solution combustion synthesized silicon doped calcium phosphates

The influence of heat-treatment temperatures (700 °C, 900°C, 1200 °C) on the phase, physical properties, crystallization rate, and in vitro properties of the solution combustion synthesized silicon-doped calcium phosphates (CaPs) were investigated. The thermodynamic aspects (enthalpy, entropy, and free energy) of the synthesis process and the crystallographic properties of the final samples were first predicted and then confirmed using density functional theory (DFT). Results demonstrated that the crystallization rate was controlled by the fuel(s) type (glycine, citric acid, and urea) and the amounts of Si⁴⁺ ions (0, 0.1, 0.4 mol). The highest calculated crystallization rate values of the un-doped, 0.1, and 0.4 mol Si-doped samples were 64%, 22%, 38%, respectively. The obtained results from the DFT simulation revealed that crystal growth in the direction of c-axis of hydroxyapatite (HAp) structure could change the stability of (001) surface of (HAp). Also, the computational data confirmed the adsorption of Si–OH groups on the (001) surface of HAp during the SCS process with an adsorption energy of 1.53 eV. AFM results in line with DFT simulation showed that the observed change in the surface roughness of Si-doped CaPs from 2 to 8 nm could be related to the doping of Si⁴⁺ ions onto the surface of CaPs. Besides, the theoretical and experimental investigation showed that crystal growth and doping of Si⁴⁺ ions could decrease the activation energy of oxygen reduction reaction (ORR). Furthermore, the results showed that the crystallized HAp structure could have great potential to efficiently reduce oxidative stress in human body.